Confirm

ARB Roller Drawer Slide Kitchen [ARB RDKEU1355]

ARB Roller Drawer Slide Kitchen

Product Code: RDKEU1355
Brand: ARB

Special Order
Stock information was correct when last checked.
To check BOVEY TRACEY current stock level, click here
FOR PLYMOUTH STOCK LEVELS PLEASE CALL 01752 343443
Additional Information

ARB ROLLER DRAWER SLIDE KITCHEN SYSTEM

Code: RDKEU1355

While contained within an ARB modular drawer frame, the Slide Kitchen is not just a drawer, but a complete, stainless steel, slide-out kitchen with bench space, a Thetford three-burner cooktop, kitchen sink and its very own utensils drawer.

The ARB Slide Kitchen has been designed specifically to be integrated with existing ARB drawer installations. The new modular unit is built to the same dimensions of the full height 1,355mm deep (typically used in a dual cab pickup) modular drawer profile, and due to the length required is only available in this size. The Slide Kitchen slots right in and can be accompanied by any of ARB’s roller (RF), mid-height (RFH) or full height drawers (RD/RDRF), and then finished off neatly with our existing range of vehicle-specific side panels. It can also be installed independent of any other drawers as a standalone unit for use in custom builds such as wagons, vans, camping canopies, service bodies and camper trailers.

The three-burner stove is designed and manufactured in England by the reputable appliance manufacturer Thetford. The burners are housed & protected by a toughened glass lid (which doubles as a splashback) within a sunken stainless-steel dish, providing its own level of wind protection and easy clean-up. The stove is suitable for pans or pots up to 220mm for the larger rapid burner and up to 11mm for the two smaller burners. For added safety, the gas automatically turns off if the burners go out or when the lid is shut. Gas is delivered via a quick-connect bayonet gas connector, which can only be connected after set-up and has to be disconnected to store, further improving the safety of this device as a whole. The stoves are all 100% tested to strict quality control to ensure its ultimate safety before leaving the plant in England.

Accessing the kitchen is no different to opening any ARB drawer; you simply pull the mechanical latch and roll the 1,250-millimetre stainless steel bench out. Once fully extended, the bench locks into place and you can operate the kitchen as a simple bench top with drawer or you can release the swing-away stove and sink by lifting the red locking tab.

The ARB Slide Kitchen is manufactured and assembled in-house by ARB to ARB’s strict quality control standards. ARB source the drawer cabinet with ARB’s engineered runners from their existing drawer manufacturer. ARB manufacture the unique swing out kitchen module and assemble the entire unit in house.

Features
> Suitable to fit with any RD/RFH/RF & RDRF 1355 Drawers. Integrates as a normal drawer would
> Fits with current vehicle specific side floor kits, with current carpet matching for a seamless fit
> Follows familiar installation instructions as a 1355 drawer would install by
> Engineered alloy extruded over extension runners, without need for a supporting leg
> Red highlighted user interaction points for quick 15 second setup
> Lock/lock out functions similar to current ARB drawers
> 304 stainless steel kitchen grade bench top 485mm wide x 1250mm long
> Thetford Stove – Argent 3 burner MK3 stove; Made in England & EU approved with 20kg loading
> 2 x 1.5kw & 1 x 2.5kw Rapid Burner, suitable for 220mm pans/pots for large burner and 110mm for smaller burners, 18,767 BTU total burners
> Quick connect, EU approved hose, 2m with EU approved regulator type EN61 (PS16bar, pd=29mbar)
> Safety features: flame out technology & lid close gas shut off
> Electronic ignition & securely mounted burners for traveling
> Clean stainless surfaces all matching throughout
> 12L collapsible silicone sink with plug. Includes dish drying base – rated to up to 90ºC
> Sink platform is preloaded to handle up to 15kg
> Main stainless surface can hold a maximum weight of 30kg evenly spread across the top
> Internal drawer dimension 345 x 450 x 145mm - fits sink, hose and cutlery holder plus more


Dimensions
Exterior - 1,355 x 500 x 310mm (H)
Interior - 1,250 x 485 x 190mm (H)
Stainless top - 1,250 x 485mm - Holds 30kg weight evenly spread
Internal small drawer - 450 x 345 x 145mm (H)

*Excludes ARB fridge/freezer shown
*Available in the UK only

£2354.68 (excluding VAT @ 20%)
Add to Basket

Fitment Data

Vehicle Engine Category Fitment Year Further Details
- All - - All - Accessories - Expedition > Storage 1948 - 2025 Made for ARB roller drawer storage system
Land Rover Castrol Bosch Luk Mann Filter Sachs